Get:1 http://changelogs.ubuntu.com brltty 5.3.1-2ubuntu2.1 Changelog [112 kB] brltty (5.3.1-2ubuntu2.1) xenial; urgency=medium * Update to restore BrlTTY auto/udev start functionality (LP: #1574538) - Re-add previously dropped udev rules to the BrlTTY package. - Create a systemd service to be used in the udev rules to launch BrlTTy when a display is connected. - Modify the existing BrlTTy service to be of type simple, so that the shell evaluation of /etc/default/brltty works, and the daemon stays running. - Modify the udev rules file to use the new brltty-udev service * Update gbp.conf for xenial branch -- Luke Yelavich Wed, 27 Apr 2016 10:35:13 +0200 brltty (5.3.1-2ubuntu2) xenial; urgency=medium * debian/rules: Call dh_installinit with --no-start, since we only use systemd, and to minimize possible rc.d issues on upgrade (LP: #1568137) [ Samuel Thibault ] * Make initramfs-tools dependency linux-only. LP: #1567658. -- Luke Yelavich Mon, 11 Apr 2016 09:42:59 +1000 brltty (5.3.1-2ubuntu1) xenial; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. - debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". * debian/rules: Drop udev rules file, systemD and udev conflict, and cause brltty to malfunction -- Luke Yelavich Fri, 08 Apr 2016 15:55:55 +1000 brltty (5.3.1-2) unstable; urgency=high * rules: Set ddeb-migration. * control: Depend on debhelper 9.20150628 for ddeb-migration. * control: Bump Standards-Version to 3.9.7 (no change). * control: Build-depend on libsystemd-dev on linux-any (Closes: Bug#818241). -- Samuel Thibault Tue, 15 Mar 2016 01:36:39 +0100 brltty (5.3.1-1ubuntu3) xenial; urgency=medium * No-change rebuild to drop python3.4 support. -- Matthias Klose Tue, 19 Jan 2016 00:41:12 +0000 brltty (5.3.1-1ubuntu2) xenial; urgency=medium * Fix unbalanced quote in debian/brltty.service that was causing syntax errors and preventing a successful install or remove. -- Tim Gardner Mon, 11 Jan 2016 19:47:16 -0700 brltty (5.3.1-1ubuntu1) xenial; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. - debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". -- Luke Yelavich Tue, 12 Jan 2016 09:44:27 +1100 brltty (5.3.1-1) unstable; urgency=low [ Samuel Thibault ] * brltty-udeb.sh: Preseed installing MATE desktop by default when brltty is used in d-i. * watch: Generalize URL. * Disable auto-detection of Cebra, Albatross, and BrailleMemo devices in the Debian Installer, since they are rare and conflict with other devices (Closes: #782732). * patches/git-18c9b3f: New patch to fix xbrlapi looping when brltty shuts down. * rules: - Remove /lib/$DEB_HOST_MULTIARCH/libbrlapi.so, link directly libbrlapi from /lib to /usr/lib (Closes: #766810). - Make binary-indep depend on brltty to actually install the binary-indep files (Closes: #805938). * brltty-udeb.prebaseconfig: - Enable screen reader in KDE. - Support 4th bootline parameter. * patches/git-8229038: New patch to add 4th bootline parameter support. * control: Drop multiarch-support pre-depend. [ Mario Lang ] * New upstream release. * Drop merged patches. * Disable systemd in udev package. [ Samuel Thibault ] * brltty-udeb.udev.rules: Add new USB IDs. * Drop merged patch. * Drop libbrlapi0.6.postinst libbrlapi0.6.postrm, now using triggers. * Drop jquery.js from brlapi reference documentation, to make sure that doxygen regenerates it. [ Mario Lang ] * debian/brltty.service: Update from upstream example. -- Mario Lang Sat, 09 Jan 2016 13:54:30 +0100 brltty (5.2~20141018-5ubuntu1) xenial; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. - debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". -- Luke Yelavich Tue, 27 Oct 2015 19:01:14 +1100 brltty (5.2~20141018-5) unstable; urgency=high * patches/60-albatross.patch: Fix probing loop stuck inside the albatross driver (Closes: #782732). -- Samuel Thibault Thu, 16 Apr 2015 23:19:16 +0200 brltty (5.2~20141018-4ubuntu4) wily; urgency=medium * Rebuild for icu 55. -- Matthias Klose Mon, 03 Aug 2015 21:21:12 +0000 brltty (5.2~20141018-4ubuntu3) wily; urgency=medium * Apply patch sent upstrea to properly build with newer Speech Dispatcher releases -- Luke Yelavich Thu, 23 Jul 2015 17:10:14 +1000 brltty (5.2~20141018-4ubuntu2) wily; urgency=medium * No-change rebuild for python3.5 transition -- Steve Langasek Wed, 22 Jul 2015 04:47:18 +0000 brltty (5.2~20141018-4ubuntu1) vivid; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. - debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". -- Luke Yelavich Tue, 17 Feb 2015 09:15:39 +1100 brltty (5.2~20141018-4) unstable; urgency=medium * patches/git-9337089: Fix xbrlapi into really not writing anything when passed option -q (closes: #777574). -- Samuel Thibault Sun, 15 Feb 2015 02:25:14 +0100 brltty (5.2~20141018-3) unstable; urgency=medium * brltty-udeb.prebaseconfig: Make grub beep at boot when brltty was used during installation (Closes: #774536). * patches/git-2421eda: Fix xbrlapi window path computation (Closes: #777377). * control: Break old version of Orca which does not have the same fix as xbrlapi. -- Samuel Thibault Sun, 08 Feb 2015 22:58:05 +0100 brltty (5.2~20141018-2ubuntu1) vivid; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. - debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". -- Luke Yelavich Wed, 07 Jan 2015 12:37:00 +1100 brltty (5.2~20141018-2) unstable; urgency=medium * patches/git-a7123d7: Fix brlapi output with the NoScreen screen driver. (Closes: #767601). * libbrlapi-dev.install: Do not install internal brltty headers (Closes: #766844). * rules: Remove brltty headers from brltty-udeb. -- Samuel Thibault Thu, 06 Nov 2014 19:53:48 +0100 brltty (5.2~20141018-1ubuntu1) vivid; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. - debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". -- Luke Yelavich Mon, 10 Nov 2014 16:50:38 +1100 brltty (5.2~20141018-1) unstable; urgency=medium * New upstream snapshot, very close to upstream 5.2 release. - control: Build-Depend on pkg-config - brltty-udeb.udev.rules: Update autostart rules with newer devices. - patches/30-format-security.patch, 60-fix-man-install.patch, 70-fs-hang-fix.patch, 80-kfreebsd.patch, 90-zh-lang-fix.patch: Remove, merged upstream - rules: Fix table and help paths. * rules: Fix passing CL_DATE to sed (Closes: #708585). * brltty-udeb.prebaseconfig: Fix auto-starting at-spi and orca in XFCE and LXDE. -- Samuel Thibault Sat, 25 Oct 2014 22:33:42 +0200 brltty (5.0-3) unstable; urgency=low [ Paul Gevers ] * Improved timestamp fix in man pages to be independent of locales and file timestamps (Closes: #708585) [ Samuel Thibault ] * Team upload. * Append the d-i -inherited configure to the end of brltty.conf instead of dropping it (which was thus losing the documentation for the user). * patches/90-zh-lang-fix.patch: Fix zh translation syntax. * brltty-udeb.prebaseconfig: Enable accessibility in XFCE, LXDE and MATE sessions too. * Bump Standards-Version to 3.9.6 (no changes). -- Samuel Thibault Sat, 27 Sep 2014 00:46:19 +0200 brltty (5.0-2ubuntu3) utopic; urgency=medium * debian/brltty.service: Respect disabling of brltty in the /etc/default file. Turn this into a "Type=simple" job by running in the foreground so that the unit can tell apart "disabled" from "running". (LP: #1316804) -- Martin Pitt Wed, 04 Jun 2014 08:56:22 +0200 brltty (5.0-2ubuntu2) trusty; urgency=medium * No change rebuild to drop python3.3 compiled extension. -- Dimitri John Ledkov Mon, 31 Mar 2014 19:35:18 +0100 brltty (5.0-2ubuntu1) trusty; urgency=medium * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. -- Luke Yelavich Fri, 14 Mar 2014 15:16:38 +1100 brltty (5.0-2) unstable; urgency=medium * Fix debian/watch file. * Fix download URLs in copyright file(s). * debian/patches/80-kfreebsd.patch: Try to fix build failure on kFreeBSD. Patch taken from upstream, but squashed, so no commit ID. -- Mario Lang Thu, 13 Mar 2014 14:42:49 +0100 brltty (5.0-1) unstable; urgency=low [ Samuel Thibault ] * control: - Make python*-brlapi description more explicit. - Bump Standards-Version to 3.9.5 (no changes). * debian/initramfs/hooks/brltty: rename to .in, and make DEB_HOST_MULTIARCH computed at build time by debian/rules (Closes: #725986). * Add brltty 5.0 USB IDs to udev rules. [ Jason White ] * Add support for systemd (based on upstream service file). Closes: #726783. [ Paul Gevers ] * Adjust build and source files to be able to build against speech-dispatcher 0.8 * Fix timestamp in man pages and strip LinuxDoc-Tools version from html (Closes: #708585) [ Mario Lang ] * New upstream release. * debian/source/options: compress with xz. * debian/patches/20-sbin.patch: Update. * debian/patches/30-format-security.patch: New. * debian/brltty.examples: Update to account for renaming of a directory. * (temporarily) disable bluetooth in udeb to prevent linking against non-udeb packages. * debian/patches/60-fix-man-install.patch: Cherry pick a1e3a6a71d1278e243881ae7abdf0b65841c6aee from upstream to fix installation of man pages for driver-specific tools. * debian/patches/70-fs-hang-fix.patch: Cherry pick aa3c189d5fb32859d2e93164f59255db35aea4f8 from upstream to fix issues with FreedomScientific driver. -- Mario Lang Thu, 13 Mar 2014 11:18:19 +0100 brltty (4.5-3ubuntu3) trusty; urgency=medium * No change rebuild against libicu52 -- Dimitri John Ledkov Fri, 27 Dec 2013 03:05:36 +0000 brltty (4.5-3ubuntu2) trusty; urgency=low * Adjust build and source files to be able to build against speech-dispatcher 0.8 * Build-dep on libspeechd-dev >= 0.8 -- Luke Yelavich Mon, 11 Nov 2013 16:02:41 +1100 brltty (4.5-3ubuntu1) saucy; urgency=low * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Drop explicit build dependency on tcl8.4. -- Luke Yelavich Tue, 18 Jun 2013 15:29:50 +1000 brltty (4.5-3) unstable; urgency=low * Add python3-brlapi bindings. Thanks Luke for the Ubuntu work. * Harmonize some rules with ubuntu packaging. * Fix erroneous BRLAPI_DOT_CHORD value due to using awk instead of gawk. (Closes: #708595) * Merge wheezy changes: * As discussed in bug Bug#705599, synchronize with finish-install on the method to enable accessibility in the installed system when accessibility was enabled in the installer. * Also enable sound events at gdm banner. * Add xbrlapi.desktop file to gdm session to get braille keyboard input working. Closes: #680636. * brltty-udeb.sh: Put Xorg killing in background, to avoid getting stuck if Xorg is not actually to be started after all (textmode installer). Also kill bterm, in case udev detects the braille device after bterm is started. Closes: #705196. -- Samuel Thibault Mon, 17 Jun 2013 22:15:01 +0200 brltty (4.5-2ubuntu1) saucy; urgency=low [ Samuel Thibault ] * Fix erroneous BRLAPI_DOT_CHORD value due to using awk instead of gawk. (Closes: #708595) [ Luke Yelavich ] * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Build python bindings for python 3. - Drop explicit build dependency on tcl8.4. -- Luke Yelavich Fri, 31 May 2013 11:44:28 +1000 brltty (4.5-2) unstable; urgency=low * Build-Depend on cython instead of python-pxrex. * Fix "Ensure backwards compatible Java bytecode is built" by applying the proposed patch (Closes: #688127) -- Mario Lang Thu, 16 May 2013 14:38:06 +0200 brltty (4.5-1ubuntu1) saucy; urgency=low * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Build python bindings for python 3. - Ensure Java bytecode built is compatible with older versions of Java - Drop explicit build dependency on tcl8.4. -- Luke Yelavich Wed, 15 May 2013 07:31:23 +1000 brltty (4.5-1) unstable; urgency=low [ Samuel Thibault ] * control: - Make libbrlapi-dev Multi-Arch: same. - Fix long line in brltty description. - Fix libbrlapi-jni section into java. * brltty.{pre,post}{inst,rm}: Remove old conffiles. Closes: #704068. * Fix stripping xbrlapi. * Rename libbrlapi0.5 into libbrlapi0.6 to follow soname change. [ Mario Lang ] * New upstream release. + Dropped debian/patches/30-late-fixes-* -- Mario Lang Tue, 07 May 2013 13:33:03 +0200 brltty (4.4-10ubuntu1) saucy; urgency=low * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Use cython for building python bindings. - Build python bindings for python 3. - Adjust the brlapi python example in the brlapi.pyx file to work with python 3. - Remove obsolete config file on upgrade from 4.3 or earlier. - Ensure Java bytecode built is compatible with older versions of Java - Drop explicit build dependency on tcl8.4. -- Luke Yelavich Wed, 08 May 2013 09:34:08 +1000 brltty (4.4-10) unstable; urgency=low * Add xbrlapi.desktop file to gdm session to get braille keyboard input working. Closes: #680636. -- Samuel Thibault Mon, 15 Apr 2013 21:42:05 +0200 brltty (4.4-9) unstable; urgency=high * brltty-udeb.sh: Put Xorg killing in background, to avoid getting stuck if Xorg is not actually to be started after all (textmode installer). Also kill bterm, in case udev detects the braille device after bterm is started. Closes: #705196. -- Samuel Thibault Thu, 11 Apr 2013 09:17:49 +0200 brltty (4.4-8ubuntu4) raring; urgency=low * Drop explicit build dependency on tcl8.4. LP: #1155269. -- Matthias Klose Thu, 14 Mar 2013 11:40:09 -0700 brltty (4.4-8ubuntu3) raring; urgency=low * debian/patches/50-fix-socket-leak.patch:: Update to use upstream's preferred and further tested fix. -- Luke Yelavich Fri, 22 Feb 2013 23:41:55 +0000 brltty (4.4-8ubuntu2) raring; urgency=low * debian/patches/50-fix-socket-leak.patch: make sure sockets rae closed properly. Thanks to Ryan Lortie for the patch. -- Luke Yelavich Fri, 22 Feb 2013 16:10:26 +0000 brltty (4.4-8ubuntu1) raring; urgency=low * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Use cython for building python bindings. - Build python bindings for python 3. - Adjust the brlapi python example in the brlapi.pyx file to work with python 3. - Remove obsolete config file on upgrade from 4.3 or earlier. - Ensure Java bytecode built is compatible with older versions of Java: -- Luke Yelavich Wed, 30 Jan 2013 08:46:30 +1100 brltty (4.4-8) unstable; urgency=low * brltty-udeb.sh: - Fix typo in path. - Kill Xorg instead of debconf to switch back installer from g-i to textmode. Also, sleep instead of busy-waiting for Xorg. Closes: #696972. -- Samuel Thibault Mon, 31 Dec 2012 00:42:37 +0100 brltty (4.4-7) unstable; urgency=low * control: Add >= 8.5~ version to tcl build-depend, as brltty won't build with tcl 8.4. * patches/30-late-fixes-r6685.patch: Avoid cosmetic change in patch. -- Samuel Thibault Thu, 20 Dec 2012 20:41:43 +0100 brltty (4.4-6ubuntu1) raring; urgency=low * Merge from Debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Use cython for building python bindings. - Build python bindings for python 3. - Adjust the brlapi python example in the brlapi.pyx file to work with python 3. - Remove obsolete config file on upgrade from 4.3 or earlier. - Ensure Java bytecode built is compatible with older versions of Java: + d/p/41-bytecode-compat.patch: Patch to specify source/target = 1.5 during build process. -- Logan Rosen Mon, 10 Dec 2012 16:16:03 -0500 brltty (4.4-6) unstable; urgency=low * brltty-udeb.prebaseconfig: Enable orca in gnome3 sessions too. * patches/30-late-fixes-r6685.patch: New patch to trivially add support for EL*c. * patches/30-late-fixes-r6777.patch: New patch to trivially add support for Focus 14. -- Samuel Thibault Tue, 02 Oct 2012 02:42:49 +0200 brltty (4.4-5ubuntu6) raring; urgency=low * Rebuild to drop python3.2 extension. -- Matthias Klose Thu, 08 Nov 2012 11:15:36 +0000 brltty (4.4-5ubuntu5) raring; urgency=low * Build-depend on python3-all-dev instead of python3-dev. -- Matthias Klose Tue, 23 Oct 2012 12:53:53 +0200 brltty (4.4-5ubuntu4) raring; urgency=low * No-change upload to build for python3.3. -- Matthias Klose Tue, 23 Oct 2012 10:30:36 +0200 brltty (4.4-5ubuntu3) quantal; urgency=low * Ensure Java bytecode built is compatible with older versions of Java (LP: #1049757): - d/p/41-bytecode-compat.patch: Patch to specify source/target = 1.5 during build process. -- James Page Wed, 19 Sep 2012 16:45:22 +0100 brltty (4.4-5ubuntu2) quantal; urgency=low * Remove obsolete config file on upgrade from 4.3 or earlier. (LP: #1022927) -- Luke Yelavich Mon, 10 Sep 2012 14:22:07 +1000 brltty (4.4-5ubuntu1) quantal; urgency=low * Merge from debian unstable. (LP: #1029864) Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. - Use cython for building python bindings. - Build python bindings for python 3. - Adjust the brlapi python example in the brlapi.pyx file to work with python 3. -- Luke Yelavich Fri, 07 Sep 2012 10:07:00 +1000 brltty (4.4-5) unstable; urgency=low [ Mario Lang ] * Cherry-pick r6587 from upstream to fix accents output in screen message (Closes: Bug#680648). [ Samuel Thibault ] * Cherry-pick r6588 from upstream to unfuzzy actually-translated messages (Closes: Bug#680638). * Cherry-pick r6592 and r6625 from upstream to fix typing modifiers in X11 (Closes: Bug#681460). * Regenerate configure, add autoconf and tcl build-dependency. * Cherry-pick r6623 from upstream to fix the atspi-2 screen driver. Add atspi-2 and glib build-dependency accordingly. * 40-no-update-pot.patch: Disable spurious update of .po files. -- Samuel Thibault Tue, 28 Aug 2012 10:09:36 +0200 brltty (4.4-4ubuntu1) quantal-proposed; urgency=low Cherry-pick unreleased changes from Debian brltty git: [ Mario Lang ] * Cherry-pick r6587 from upstream to fix accents output in screen message (Closes: Bug#680648). [ Samuel Thibault ] * Cherry-pick r6588 from upstream to unfuzzy actually-translated messages (Closes: Bug#680638). * Cherry-pick r6592 from upstream to fix typing modifiers in X11 (Closes: Bug#681460) [ Luke Yelavich ] * Merge from debian unstable. (LP: #1029864) Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. * Use cython for building python bindings. * Fix ubuntu branch in gbp.conf. * Fix patches taken from upstream that were not properly applying with quilt * Build python bindings for python 3. * Adjust the brlapi python example in the brlapi.pyx file to work with python 3. -- Luke Yelavich Thu, 02 Aug 2012 09:02:07 +1000 brltty (4.4-4) unstable; urgency=medium * Severity set to medium as it completely breaks access to d-i. * brltty-udeb.*: Use /var/run/brltty.pid instead of /var/run/brltty, as the latter is now installed as directory by brltty (Closes: #680208). -- Samuel Thibault Wed, 04 Jul 2012 23:05:59 -0300 brltty (4.4-3) unstable; urgency=low [ Mario Lang ] * Update the list of supported displays in package description. [ Samuel Thibault ] * brltty-udeb.udev.rules: Add new braille USB IDs to d-i udev rules. -- Samuel Thibault Wed, 27 Jun 2012 14:19:16 -0300 brltty (4.4-2) unstable; urgency=low [ Jason White ] * control: Add brltty-dbg and libbrlapi-dbg packages. * rules: Install debugging information. [ Samuel Thibault ] * patches/30-late-fixes-r6572.patch: Add patch to fix crash on brlapi activity while devices are unplugged. -- Samuel Thibault Mon, 18 Jun 2012 11:54:12 +0200 brltty (4.4-1ubuntu1) quantal; urgency=low * Merge from debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, the legacy at-spi stack is no longer in the archive. -- Luke Yelavich Fri, 08 Jun 2012 14:56:32 +1000 brltty (4.4-1) unstable; urgency=low [ Samuel Thibault ] * debian/rules: Disable USB support on kFreeBSD (Closes: #668669). [ Mario Lang ] * New upstream release. - Fixes spurious warning from xbrlapi (Closes: #673880). * Drop all cherry-picked patches. * Do not build the documentation twice. * Cherry-pick some late fixes from upstream. * brltty recommends python now because of /etc/brltty/latex-acces.ctb which is written in Python. * Install brltty-trtxt. * Install brltty-ctb and brltty-ttb as well, and move vstp to /usr/bin. -- Mario Lang Thu, 07 Jun 2012 16:08:28 +0200 brltty (4.3-3) unstable; urgency=low * control: - Move xbrlapi from brltty-x11 to new xbrlapi package. Should fix spurious installation of brltty through orca's recommandation of xbrlapi. - Set libbrlapi0.5 Multi-arch: same. * libbrlapi-dev.links: Remove, move to ... * rules: ... here, install libbrlapi in multiarch path. * brltty-x11.{install,manpages}: Move xbrlapi to xbrlapi package. -- Samuel Thibault Sun, 25 Mar 2012 23:08:36 +0200 brltty (4.3-2) unstable; urgency=low * debian/patches/fr.po.patch: New patch to fix accents in french translations (Closes: #655291). * debian/rules: Do not enable hardening in brltty-udeb (saves room). * control: Bump Standards-Version to 3.9.3 (no changes). * debian/patches/40-esys-64.patch: New patch from upstream to fix support for large esys/iris displays. -- Samuel Thibault Mon, 27 Feb 2012 03:13:59 +0100 brltty (4.3-1ubuntu6) quantal; urgency=low * No-change rebuild with openjdk-7 as default-jdk. -- James Page Fri, 18 May 2012 11:35:03 +0100 brltty (4.3-1ubuntu5) precise; urgency=low * Add Pre-Depends: dpkg (>= 1.15.7.2) to brltty-x11 for dpkg-maintscript-helper. -- Colin Watson Tue, 10 Apr 2012 17:53:32 +0100 brltty (4.3-1ubuntu4) precise; urgency=low * Add conffile upgrade handling for a run of conffiles that were dropped or renamed since lucid. -- Steve Langasek Sun, 25 Mar 2012 21:45:37 +0000 brltty (4.3-1ubuntu3) precise; urgency=low * Rebuild for libicu48. -- Colin Watson Mon, 21 Nov 2011 16:05:21 +0000 brltty (4.3-1ubuntu2) precise; urgency=low * Comment out the udev rule line for device 10c4:ea60, as it is a generic USB serial controller used by many other pieces of hardware (LP: #874181) -- Luke Yelavich Wed, 09 Nov 2011 14:38:55 +1100 brltty (4.3-1ubuntu1) precise; urgency=low * Merge from debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage - Do not build the at-spi driver, it is in universe -- Luke Yelavich Fri, 21 Oct 2011 15:54:57 +1100 brltty (4.3-1) unstable; urgency=low [ Samuel Thibault ] * New upstream release. - debian/patches/30-upstream-table-fixes.patch: Drop, merged upstream. - debian/patches/40-silence-offset-warning.patch: Drop, fixed upstream. - debian/patches/50-screen_linux_build.patch: Drop, merged upstream. - debian/rules: Help files are now called *.txt. Install localized messages. - debian/60xbrlapi: Add script to automatically start xbrlapi on X11 session startup. * debian/rules: Use dh_python2 instead of dh_pysupport (Closes: #633910). * debian/control: Bump dependencies accordingly. Set new XS-Python-Version field to 2.7. * debian/brltty-udeb.start: New script installed as /lib/debian-installer.d/S19brltty, to record in /var/run/brltty-debconf that debconf is about to be started with the current framebuffer parameters. * debian/brltty-udeb.init: Remove udevadm settle call, and move disabling framebuffer to... * debian/brltty-udeb.sh: here, but create a /lib/debian-installer.d/S20brltty script instead of doing it immediately, since debconf might be currently running and about to overwrite the database. Last but not least, if /var/run/brltty-debconf exists, kill debconf to let it restart without framebuffer (Closes: #611648). * debian/brltty-udeb.udev.rules: Add 1fe4:0054 entry. * debian/rules: Add build-indep and build-arch targets. * debian/rules: Set DEB_BUILD_HARDENING=1 to enable hardening. * debian/control: - Depend on hardening-check. - Build-Conflict with libatspi-dev. * debian/rules: Do not build and install atspi driver any more. [ Mario Lang ] * Fix brace-expansion-in-debhelper-config-file debian/brltty.install * debian/initramfs/hooks/brltty: Update for multiarch (Closes: Bug#653587). -- Samuel Thibault Fri, 06 Jan 2012 00:41:46 +0100 brltty (4.2-8ubuntu5) oneiric; urgency=low * debian/control: Don't build depend on libatspi-dev, to make sure that brltty-x11 doesn't depend on a part of the legacy at-spi stack (LP: #828759) -- Luke Yelavich Mon, 29 Aug 2011 15:08:58 +1000 brltty (4.2-8ubuntu4) oneiric; urgency=low * Update the udev rules files so they are both in sync, and make sure the FDDI serial controller display rules are commented out again * Fix branch pointer in gbp.conf * Make sure /lib/brltty/brltty.sh is executable in the brltty package -- Luke Yelavich Thu, 11 Aug 2011 16:34:51 +1000 brltty (4.2-8ubuntu3) oneiric; urgency=low * Switch to dh_python2. (LP: 788514) -- Barry Warsaw Thu, 14 Jul 2011 17:28:22 -0400 brltty (4.2-8ubuntu2) natty; urgency=low * Remove conflict markers from debian/changelog and debian/brltty-udeb.init. -- Colin Watson Tue, 01 Mar 2011 11:35:56 +0000 brltty (4.2-8ubuntu1) natty; urgency=low * Merge from debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Explicitly include sys/stat.h in Programs/sys_linux.c - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage -- Luke Yelavich Thu, 24 Feb 2011 12:26:05 +1100 brltty (4.2-8) unstable; urgency=low * debian/brltty-udeb.prebasconfig: do not stop and not setup gconf just because no table was specified in kernel parameters. * debian/brltty.postinst: Fix typo. * debian/control: - Build-depend on libespeak-dev, add brltty-espeak package. - Bump Standards-Version to 3.9.2 (no change needed) - Remove libbrlapi-java dependency on JRE. * debian/rules: Remove --without-espeak configure option, install libbrlttyses.so * debian/brltty-udeb.prebaseconfig: Fix parsing brltty= when not all parameters are provided. * debian/patches/50-screen_linux_build.patch: Upstream fix for linux screen driver build (Closes: #625153). * debian/cl-brlapi.postinst, cl-brlapi.prerm: Remove, and drop dh_lisp call from debian/control, these are now void. * debian/rules: To avoid spurious diffs, remove config.{sub,guess} at clean, and copy them from autotools-dev just before configure. -- Samuel Thibault Mon, 14 Feb 2011 00:49:23 +0100 brltty (4.2-7) unstable; urgency=low * debian/brltty-udeb.init: Call udevadm settle before deciding whether to disable the framebuffer or not. -- Samuel Thibault Fri, 24 Dec 2010 01:04:27 +0100 brltty (4.2-6) unstable; urgency=low * debian/patches/40-silence-offset-warning.patch: New patch to silence permanent "input byte missing at offset 14" warnings on clio and esys devices, making the console unusable. -- Samuel Thibault Wed, 17 Nov 2010 23:58:16 +0100 brltty (4.2-5) unstable; urgency=low * debian/patches/30-upstream-table-fixes.patch: Upstream braille tables fixes. * debian/brltty-udeb.prebaseconfig: When braille is enabled, enable orca in gdm, and accessibility+orca+sounds in the created user session. * debian/rules: Move brltty-udeb finish-install script a bit later, after users are created. -- Samuel Thibault Wed, 10 Nov 2010 23:57:45 +0100 brltty (4.2-4ubuntu1) natty; urgency=low * Merge from debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Explicitly include sys/stat.h in Programs/sys_linux.c - Create separate rules file for the brltty deb, with the rules now pointing to a separate script - Add gbp.conf file for git buildpackage -- Luke Yelavich Mon, 18 Oct 2010 14:01:37 +1100 brltty (4.2-4) unstable; urgency=medium * debian/control: Use Package-Type instead of XC-Package-Type. * debian/brltty-udeb.udev.rules: SUBSYSTEM is usb instead of usb_device nowadays. Fixes braille autodetection in d-i. * Setting urgency to medium to fix RC bug. -- Samuel Thibault Mon, 30 Aug 2010 23:09:56 +0200 brltty (4.2-3ubuntu1) maverick; urgency=low * Merge from debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. - Explicitly include sys/stat.h in Programs/sys_linux.c * Create separate rules file for the brltty deb, with the rules now pointing to a separate script * Add gbp.conf file for git buildpackage -- Luke Yelavich Thu, 12 Aug 2010 08:39:42 +1000 brltty (4.2-3) unstable; urgency=low [ Mario Lang ] * Add libasound2-dev to Build-Depends for Linux architectures. * Binary package brltty Suggests console-braille. [ Samuel Thibault ] * Make libbrlapi-java depend on default-jre-headless | java2-runtime-headless instead of gij | java2-runtime. * Debian Installer: Make udev call /lib/udev/brltty.sh instead of /lib/brltty/brltty.sh, the former checking whether the user forced some brltty parameter on the kernel command line before calling the latter (closes: #501160). * debian/control: - Bump Standards-Version to 3.9.1 (no change needed). - Replace [!kfreebsd-i386 !kfreebsd-amd64 !hurd-i386] with [linux-any] in Build-Depends. -- Mario Lang Tue, 27 Jul 2010 01:27:08 +0200 brltty (4.2-2ubuntu1) maverick; urgency=low * Merge from debian unstable. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Enable brltty at startup on the target system if the alternate installer is used. * debian/patches/debian/patches/30-sys-stat.patch: Explicitly include sys/stat.h in Programs/sys_linux.c, fixes FTBFs -- Luke Yelavich Thu, 17 Jun 2010 16:36:01 +1000 brltty (4.2-2) unstable; urgency=low * Add libdbus-1-dev to Build-Depends for the a2 screen driver. * Remove bison from Build-Depends, no longer needed. -- Mario Lang Tue, 11 May 2010 15:39:47 +0200 brltty (4.2-1) unstable; urgency=low [ Samuel Thibault ] * debian/libbrlapi-java.docs: Add doc * debian/libbrlapi-java.doc-base: Register doc. * debian/brltty-udeb.udev.rules: Update list of supported devices. [ Mario Lang ] * New upstream release. - Drop all patches, merged upstream. - Convert to source format 3.0 (quilt). * Temporarily disable the eSpeak driver to avoid NEW processing. -- Mario Lang Tue, 11 May 2010 08:49:21 +0200 brltty (4.1-5) unstable; urgency=low [ Samuel Thibault ] * Cherry-pick upstream r4902 and 4904 to fix linking libbrlapi without libpthread. * Cherry-pick upstream r4926 to fix minus sign in vtsp.1. * Cherry-pick upstream r4927 to fix a typo. * debian/NEWS: Remove bullets, fix version number. * Override package-contains-empty-directory lib/brltty/rw/ which is on purpose. * debian/control: - Drop duplicate Priority field. - Fix duplicate short descriptions. * Move udev rules to /lib/udev/rules.d * debian/control: Bump Standards-Version to 3.8.4 (no change needed). * debian/control: Add default-jdk build-dep except on m68k. * debian/rules: - Only disable java on m68k as it should now work on all other archs. - Set JAVA_HOME to /usr/lib/jvm/default-java instead of hardcoding the use of one kind of jvm (Closes: Bug#560072). * Bindings/Python/brlapi.pyx: Apply upstream r4991 to fix an uninitialized field in python exception handling (Closes: Bug#568512). * Apply upstream r5007 to fix debian installer's fbterm start race (Closes: Bug#504385). * Bindings/Python/Makefile.in: Include /usr/share/python/python.mk and pass $(py_setup_install_args) setup.py to keep proper installation paths (Closes: Bug#571274). [ Mario Lang ] * debian/control: Add x11proto-kb-dev and libxtst-dev to Build-Depends. * Update Build-Depends version of debhelper since we are using dh_lintian now. * Fix "initramfs hooks are not executed" (Closes: #570172) * Remove a false positive dependency on /usr from init script, we do not want to rely on $remote_fs -- Mario Lang Wed, 24 Mar 2010 14:53:59 +0100 brltty (4.1-4) unstable; urgency=high * High-urgency upload for bug fix for d-i alpha release. * debian/libbrlapi-dev.links: Add /usr/lib/libbrlapi.so -> /lib/libbrlapi.so symlink to fix dynamic linking of libbrlapi by default by gcc. * Cherry-pick upstream r4916 change and regenerate configure to fix build on kfreebsd-* machines with the newer USB API (Closes: Bug#560114). -- Samuel Thibault Tue, 05 Jan 2010 23:20:29 +0100 brltty (4.1-3) unstable; urgency=high * High-urgency upload for bug fix for d-i alpha release. * debian/control, debian/rules: Temporarily disable building the java bindings to get a brltty-udeb package for d-i alpha release. -- Samuel Thibault Wed, 09 Dec 2009 00:51:07 +0100 brltty (4.1-2ubuntu6) lucid; urgency=low * debian/rules: make sure that the hooks are executable, or they do not do anything to the initramfs (Debian bug 570172). -- Kees Cook Tue, 16 Feb 2010 16:36:20 -0800 brltty (4.1-2ubuntu5) lucid; urgency=low * debian/brltty.default: - add RUN_BRLTTY=no here instead of in the brltty.postinst * debian/brltty.postinst: - do not create /etc/default/brltty here, its part of the package * debian/brltty.preinst: - remove our (non conffile) version of /etc/default/brltty on upgrade (LP: #518775) -- Michael Vogt Mon, 08 Feb 2010 13:44:47 +0100 brltty (4.1-2ubuntu4) lucid; urgency=low * debian/initramfs/scripts/init-premount/brltty: - This should not mount usbfs or fiddle with mtab -- Scott James Remnant Fri, 18 Dec 2009 15:03:59 +0000 brltty (4.1-2ubuntu3) lucid; urgency=low * debian/brltty.initramfs-top: Missed one. -- Scott James Remnant Tue, 15 Dec 2009 18:15:09 +0000 brltty (4.1-2ubuntu2) lucid; urgency=low * debian/initramfs/scripts/init-premount/brltty, debian/initramfs/hooks/brltty: Only install if we have a framebuffer and splash screen. -- Scott James Remnant Tue, 15 Dec 2009 15:05:10 +0000 brltty (4.1-2ubuntu1) lucid; urgency=low * Merge from Debian testing, remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Put udev rules file in /lib/udev/rules.d. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Disable BrlTTY grabbing devices that use the FTDI USB-to-serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Build against openjdk in Ubuntu. - Enable brltty at startup on the target system if the alternate installer is used. * udev rules have been switched to use ATTRS{} instead of the deprecated SYSFS{}. LP: #491775. -- Steve Langasek Thu, 10 Dec 2009 02:39:03 -0800 brltty (4.1-2) unstable; urgency=high * High-urgency upload for bug fix for d-i alpha release. * debian/brltty-udeb.udev.rules: Fix udev 148-2 warnings cluttering debian-installer (Closes: Bug#559564). -- Samuel Thibault Tue, 08 Dec 2009 01:59:48 +0100 brltty (4.1-1ubuntu1) lucid; urgency=low * Merge from Debian testing. Remaining changes: - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Put udev rules file in /lib/udev/rules.d. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Don't install /etc/brltty.conf in the package - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Disable BrlTTY grabbing devices that use the FTDI USB-to-serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for all python versions (python 2.6), not just the current version. - Build against openjdk in Ubuntu. - Enable brltty at startup on the target system if the alternate installer is used. * Dropped changes: - Conflicts: libbrlapi, libbrlapi1-dev - these packages are obsolete in hardy and above, no need to continue carrying a delta for this, and the packages didn't have conflicting files anyway. - brltty.preinst: drop, the udev rules path is already fixed in hardy and above. * Simplify debian/rules changes a bit -- Steve Langasek Mon, 07 Dec 2009 08:31:36 +0000 brltty (4.1-1) unstable; urgency=low * Add a debian/watch file * Stop brltty from suggesting libbrlapi-dev. * New upstream bugfix release * Use the --disable-stripping configure option * Install README.Bluetooth. -- Mario Lang Sat, 10 Oct 2009 13:58:31 +0200 brltty (4.0-9) unstable; urgency=low * Incorrect dependencies in init.d LSB header (Closes: Bug#548550) * Fix weak-library-dev-dependency of libbrlapi-dev on libbrlapi0.5 -- Mario Lang Sun, 27 Sep 2009 14:22:55 +0200 brltty (4.0-8ubuntu2) lucid; urgency=low * debian/rules: don't install /etc/brltty.conf in the package - we're dynamically editing this from the initramfs, so this really isn't suitable to be a conffile. * revert changes to check the md5sum before copying over the configuration from the initramfs: the source file *only* exists when braille=ask is passed on the kernel commandline, so there is simply no reason to *not* respect the options specified and overwrite /etc/brltty.conf (especially now that it's no longer a conffile). LP: #409802, #370728. -- Steve Langasek Tue, 17 Nov 2009 04:43:13 +0000 brltty (4.0-8ubuntu1) lucid; urgency=low * Merge from debian testing, remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Only copy the brltty config file from the initramfs if the md5sum differs. - Change maintainer to Ubuntu Accessibility Developers - Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Build for python 2.6. - Build against openjdk in Ubuntu. - Put udev rules file in /lib/udev/rules.d. - Enable brltty at startup on the target system if the alternate installer is used. -- Luke Yelavich Tue, 10 Nov 2009 10:47:14 +1100 brltty (4.0-8) unstable; urgency=low [ Dave Mielke ] * Change the "braille display offline/online" logs to DEBUG (from NOTICE). [ Lee Maschmeyer ] * en-us-g2 fixes. [ Mario Lang ] * /etc/brltty.conf is not generated during installation anymore. * Move the EuroBraille driver's clio model table into constant memory. * Remove an unnecessary memcpy(). * The VisioBraille driver's output translation table should be const. [ Samuel Thibault ] * debian/control: Bump Standards-Version to 3.8.3 [ Mario Lang ] * Support for startup during initramfs -- Mario Lang Wed, 09 Sep 2009 11:55:49 +0200 brltty (4.0-7ubuntu2) karmic; urgency=low * Fixes cherry-picked from debian: - debian/brltty.init: Fix incorrect LSB header, cherry-picked from Debian. (LP: #450176) - debian/brltty.postinst: Recover from previous init script LSB errors. -- Luke Yelavich Wed, 14 Oct 2009 10:19:16 +1100 brltty (4.0-7ubuntu1) karmic; urgency=low * Merge from debian unstable, remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Only copy the brltty config file from the initramfs if the md5sum differs. - Change maintainer to Ubuntu Accessibility Developers - Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Do not build the speechd package, speech-dispatcher is not in main. - Build for python 2.6. - Build against openjdk in Ubuntu. - Put udev rules file in /lib/udev/rules.d. - Enable brltty at startup on the target system if the alternate installer is used. -- Luke Yelavich Mon, 20 Jul 2009 11:20:14 +1000 brltty (4.0-7) unstable; urgency=low [ Samuel Thibault ] * debian/rules: also strip whitespaces in brltty-udeb's tables, strip attribute and keyboard tables too. * Cherry-pick upstream r4506: "JNI fixes for Sun-based jvms. (sm)" * Cherry-pick upstream r4687: "Pyrex doesn't convert NULL to None. (st)" * debian/control: - Bump build-depend debhelper to >= 5. - Bump Standards-Version to 3.8.2 (no change needed). - Add ${misc:Depends} dependency to libbrlapi-{java,dev,jni} - Remove libc6-dev dependency of libbrlapi-dev, as build-essential already depends on it and some ports do not have it. [ Mario Lang ] * debian/brltty.docs: Add Documents/HISTORY. * debian/control: Add Samuel Thibault to Uploaders. * debian/libbrlapi-dev.install: Install libbrlapi.a in /usr/lib (Closes: Bug#411671). -- Mario Lang Sat, 18 Jul 2009 18:09:33 +0200 brltty (4.0-6ubuntu2) karmic; urgency=low * Restore change from 4.0~svn4301-0ubuntu3, since otherwise brltty builds only with python2.5: - Bindings/Python/Makefile.in: Don't build with --quiet, call install with --install-layout=deb. -- Colin Watson Thu, 28 May 2009 14:58:27 +0200 brltty (4.0-6ubuntu1) karmic; urgency=low * Merge from debian unstable, remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Only copy the brltty config file from the initramfs if the md5sum differs. - Change maintainer to Ubuntu Accessibility Developers - Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. - Do not build the speechd package, speech-dispatcher is not in main. - Build for python 2.6. - Build against openjdk in Ubuntu. - Put udev rules file in /lib/udev/rules.d. - Enable brltty at startup on the target system if the alternate installer is used. -- Luke Yelavich Thu, 28 May 2009 09:56:12 +0200 brltty (4.0-6) unstable; urgency=low [ Mario Lang ] * debian/control: - Remove libbluetooth2-dev from Build-Depends. (Closes: 530355) - Add Vcs-Git and Vcs-Browser fields. [ Samuel Thibault ] * Add Homepage field. [ Mario Lang ] * debian/control: - Set Maintainer to "Debian Accessibility Team". - Update package description to mention newly supported displays. * Fix from upstream SVN: r4495: The Java bindings should load the JNI part automatically. -- Mario Lang Mon, 25 May 2009 00:41:02 +0200 brltty (4.0-5) unstable; urgency=low * Fix "X11 is left enabled" by changing --without-x to --disable-x during udeb configure (Closes: #529526) -- Mario Lang Wed, 20 May 2009 15:36:48 +0200 brltty (4.0-4) unstable; urgency=low * debian/brltty-udeb.udev.rules: Add new USB IDs. * debian/brltty.docs: Install Tables/README-* which fixes "Should provide the tables documentation". (Closes: #522702) * debian/brltty.examples: Install Hotplug/udev.rules and Hotplug/upstart.job. * debian/libbrlapi0.5.copyright: Update copyright years and mention LGPL version. -- Mario Lang Mon, 18 May 2009 11:49:26 +0200 brltty (4.0-3) unstable; urgency=low * Fix Build-Depends to actually include libspeechd-dev. A comma was missing, argh! -- Mario Lang Sun, 17 May 2009 19:11:42 +0200 brltty (4.0-2) unstable; urgency=low * debian/control: Move cl-brlapi from section admin to lisp. * Enable speech-dispatcher support via new binary package brltty-speechd. (Closes: #486291) * Update debian/copyright: - Update copyright years. - Mention /usr/share/doc/brltty/CONTRIBUTORS. - Add info about license version. - Mention that tables are now licensed LGPL. * debian/brltty.docs: Install Documents/CONTRIBUTORS. * Merge from Ubuntu: "Add 'status' action to init script": - debian/control: brltty: Depend on lsb-base >= 3.2-14, providing status_of_proc(). - debian/brltty.init: Add the 'status' action. -- Mario Lang Sun, 17 May 2009 16:55:20 +0200 brltty (4.0-1) unstable; urgency=low * New upstream release: - Fixes "causes excessive resume of USB" (Closes: #497155). * Fix "Bus specifiers are mistakenly interpreted as relative paths" by removing not so clever code from debian/brltty-udeb.prebaseconfig (Closes: #516091) * Fix "Use libncursew5-dev". (Closes: #488993) * debian/control: Move libbrlapi-java from section libs to java. * Upgrade Standards-Version from 3.7.3 to 3.8.1 (no changes). * debian/brltty.examples: Remove, unused. -- Mario Lang Fri, 15 May 2009 13:49:14 +0200 brltty (4.0~svn4301-0ubuntu5) karmic; urgency=low * No change rebuild to transition to libicu40 -- Luke Yelavich Tue, 12 May 2009 08:13:22 +1000 brltty (4.0~svn4301-0ubuntu4) jaunty; urgency=low * debian/brltty.init: Only replace brltty.conf if the md5sum of the existing file is the same as what was shipped with the package. * debian/rules: Put the md5sum of brltty.conf into the newly installed init file. * debian/brltty-udeb.prebaseconfig: Enable BrlTTY at startup on the target system. (LP: #299989) -- Luke Yelavich Wed, 18 Mar 2009 13:59:20 +1100 brltty (4.0~svn4301-0ubuntu3) jaunty; urgency=low * Build for python2.6. * Bindings/Python/Makefile.in: Don't build with --quiet, call install with --install-layout=deb. -- Matthias Klose Tue, 24 Feb 2009 21:37:10 +0100 brltty (4.0~svn4301-0ubuntu2) jaunty; urgency=low * debian/brltty-udeb.udev.rules: Use the hm driver for the BrailleSense -- Luke Yelavich Tue, 17 Feb 2009 09:58:49 +1100 brltty (4.0~svn4301-0ubuntu1) jaunty; urgency=low * New upstream svn snapshot to fix a few bugs, and to add support for a new Braille display. -- Luke Yelavich Tue, 17 Feb 2009 09:31:50 +1100 brltty (4.0~svn4289-0ubuntu1) jaunty; urgency=low * New upstream svn snapshot * debian/rules: - Point to new location for README files for braille drivers. - Table data files have a different extension, so point to new files for processing for the udeb. * debian/control: Refer explicitly to libbluetooth-dev. * debian/brltty-udeb.udev.rules: Updated to match the IDs in upstream's rules file. -- Luke Yelavich Fri, 13 Feb 2009 16:52:05 +1100 brltty (3.10-0ubuntu3) jaunty; urgency=low * debian/rules: Install udev rules into /lib/udev/rules.d * debian/brltty.dirs: Create new path instead * debian/brltty-udeb.dirs: Create new path instead * debian/brltty.preinst: Remove the old rules if unmodified * debian/control: Add Breaks to ensure the right version of udev is used. -- Scott James Remnant Fri, 09 Jan 2009 16:44:58 +0000 brltty (3.10-0ubuntu2) intrepid; urgency=low * Configure the udeb with --disable-x rather than --without-x. -- Colin Watson Wed, 06 Aug 2008 01:45:07 +0100 brltty (3.10-0ubuntu1) intrepid; urgency=low * New upstream release. * debian/brltty.manpages: Adjust location of vstp manpage. -- Luke Yelavich Tue, 05 Aug 2008 10:57:34 +1000 brltty (3.10~r3724-1.1) unstable; urgency=medium * Non-maintainer upload. * Apply patch from Samuel Thibault to fix FTBFS in unstable. (Closes: #516240) -- Adeodato Simó Sat, 14 Mar 2009 11:09:53 +0100 brltty (3.10~r3724-1ubuntu5) intrepid; urgency=low * Set java include directory and java path. -- Matthias Klose Thu, 31 Jul 2008 07:27:33 +0000 brltty (3.10~r3724-1ubuntu4) intrepid; urgency=low * (Build-)depend on default-jre/-jdk. -- Matthias Klose Thu, 31 Jul 2008 06:36:12 +0000 brltty (3.10~r3724-1ubuntu3) intrepid; urgency=low * debian/control - Depend on lsb-base >= 3.2-14, providing status_of_proc() - Bump Standards-Version to 3.8.0 * debian/brltty.init - Add the 'status' action (LP: #251626) -- Nathan Handler Thu, 24 Jul 2008 16:15:45 -0500 brltty (3.10~r3724-1ubuntu2) intrepid; urgency=low * Rebuild for libgpmg1 -> libgpm2 transistion. -- Steve Kowalik Sun, 20 Jul 2008 05:24:35 +1000 brltty (3.10~r3724-1ubuntu1) intrepid; urgency=low * Merge from debian unstable, remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Change maintainer to Ubuntu Accessibility Developers - Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. -- Luke Yelavich Wed, 04 Jun 2008 14:53:31 +1000 brltty (3.10~r3724-1) unstable; urgency=low * New subversion snapshot, fixing FTBFS (Closes: Bug#482205). -- Mario Lang Thu, 22 May 2008 18:37:09 +0200 brltty (3.10~r3715-1) unstable; urgency=low * New subversion snapshot with minor fixes. * Clean up the multi binary package handling a bit, now installing non-udeb build to debian/tmp. * debian/brlapi0.5-dev.copyright: Renamed to libbrlapi-dev.copyright so that it gets installed. * Use upstream rules to install man3 manpages (Closes: Bug#479754). * No longer ship brltty-config, it used to be wrong and I don't see a single use-case for it. * debian/brltty.conf: Deleted, unused. -- Mario Lang Fri, 09 May 2008 16:51:16 +0200 brltty (3.10~r3710-1) unstable; urgency=low * New subversion snapshot, target for unstable after good test results. * Disable the Java bindings on alpha and hppa (in addition to the already disabled archs) (Closes: Bug#477848). -- Mario Lang Sun, 04 May 2008 22:06:34 +0200 brltty (3.10~r3666-1) experimental; urgency=low * New subversion snapshot. * Build-Depend on libicu-dev but disable icu in the udeb build (Closes: Bug#475604). -- Mario Lang Tue, 15 Apr 2008 23:27:18 +0200 brltty (3.10~r3662-2) experimental; urgency=low * Add --disable-iconv to udeb configure options (Closes: Bug#475612). -- Mario Lang Sun, 13 Apr 2008 20:18:31 +0200 brltty (3.10~r3662-1) experimental; urgency=low * New subversion snapshot. - Fix to Java building outside of sourcedir and Lisp bindings merged upstream. * Fix libbrlapi-dev header installation (Closes: Bug#475015). -- Mario Lang Sat, 12 Apr 2008 14:53:51 +0200 brltty (3.10~r3654-1) experimental; urgency=low * New upstream subversion snapshot. - This adds unicode support. Please test it so that we can evaluate if it can be used for Lenny. * Fix library name in Lisp bindings. -- Mario Lang Fri, 11 Apr 2008 20:32:29 +0200 brltty (3.9-7ubuntu1) intrepid; urgency=low * Merge from debian unstable, remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Change maintainer to Ubuntu Accessibility Developers - Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. -- Luke Yelavich Sat, 03 May 2008 11:49:31 +1000 brltty (3.9-7) unstable; urgency=low * Fix missing include files in libbrlapi-dev (Closes: Bug#475015). * Build-Depend on python-dev >= 2.5.2 and rebuild for python transition. -- Mario Lang Mon, 14 Apr 2008 01:43:18 +0200 brltty (3.9-6ubuntu1) hardy; urgency=low * Merge from debian unstable, remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Change maintainer to Ubuntu Accessibility Developers - Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. - Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. -- Luke Yelavich Fri, 28 Mar 2008 09:28:17 +1100 brltty (3.9-6) unstable; urgency=low * Add patch to fix vcsa reading on big-endian architectures (Closes: Bug#467269). * Disable Java bindings on hurd-i386 (Closes: Bug#469984). * Fix the TTY driver (Closes: Bug#467192). * Rework the init script: - Use --exec for start-stop-daemon to finally resolve long standing "double-started brltty on upgrade" problems. - Use lsb/init-functions for output. -- Mario Lang Tue, 25 Mar 2008 19:16:53 +0100 brltty (3.9-5ubuntu2) hardy; urgency=low * debian/rules: Copy the ubiquity script after debian/brltty/usr/lib is cleaned out. * debian/brltty.initramfs-hook: Do not copy udev rules to the initramfs. -- Luke Yelavich Fri, 29 Feb 2008 11:34:43 +1100 brltty (3.9-5ubuntu1) hardy; urgency=low * Merge from debian unstable, (LP: #176477) remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. - Change maintainer to Ubuntu Accessibility Developers * Disable BrlTTY grabbing devices that use the FTDI USB to serial chip. (LP: #84139) * Remove the dh-lisp build-dependency, remove the cl-brlapi package, and adjust the brltty package description accordingly. dh-lisp is not in main. -- Luke Yelavich Sat, 15 Dec 2007 11:44:23 +1100 brltty (3.9-5) unstable; urgency=low * Hopefully fix disabling Java support on ARM for real this time. * Disable Java on m68k as well. * Revisit debhelper calls and simplify. * Convert debian/copyright and debian/libbrlapi0.5.copyright to UTF-8. * Update Standards-Version to 3.7.3 (no changes). * Fix debian/rules so that "dpkg-buildpackage -j2" does not fail. * Make python-brlapi part of section python. -- Mario Lang Fri, 14 Dec 2007 00:35:44 +0100 brltty (3.9-4ubuntu1) hardy; urgency=low * Merge from debian unstable, (LP: #172310) remaining changes: - Conflicts: libbrlapi, libbrlapi-dev, libbrlapi1-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. - Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. * Ubuntu changes dropped: - Remove compiler.h include in Programs/usb_linux.c. * Change maintainer to Ubuntu Accessibility Developers -- Luke Yelavich Tue, 27 Nov 2007 21:47:44 +1100 brltty (3.9-4) unstable; urgency=low * Disable Java support on ARM. -- Mario Lang Tue, 20 Nov 2007 19:47:01 +0100 brltty (3.9-3) unstable; urgency=low * Set $JAVA_HOME to /usr/lib/jvm/java-gcj. -- Mario Lang Tue, 20 Nov 2007 18:23:02 +0100 brltty (3.9-2) unstable; urgency=low * Only Build-Depend on libgpmg1-dev on Linux archs (Closes: Bug#450795). -- Mario Lang Sun, 11 Nov 2007 21:42:25 +0100 brltty (3.9-1) unstable; urgency=low * New upstream release. * Build-depend on libgpmg1-dev. -- Mario Lang Wed, 17 Oct 2007 18:02:18 +0200 brltty (3.8-8) unstable; urgency=low * Disable GPM in udeb build (Closes: Bug#440731, Bug#441782). -- Mario Lang Tue, 11 Sep 2007 14:10:07 +0200 brltty (3.8-7) unstable; urgency=low * Add --mandir to configure call. Upstream added GNU/kFreeBSD support so this should finally (Closes: Bug#414068). -- Mario Lang Sun, 09 Sep 2007 17:37:50 +0200 brltty (3.8-6) unstable; urgency=low * Fix typo in libbrlapi-dev Conflicts line. * Build-Depend on java-gcj-compat-dev. * Uniformly refer to hardware we support as "braille display" and remove references to "soft" and "refreshable" from package description. Hopefully this makes things a little more consistent and clearer. * Initial upload to unstable. -- Mario Lang Sun, 02 Sep 2007 12:40:05 +0200 brltty (3.8-5) experimental; urgency=low * libbrlapi-dev should conflict with libbrlapi1-dev (<< 3.8). * Pull changes from r3208 to fix up Lisp bindings. -- Mario Lang Sun, 26 Aug 2007 13:23:47 +0200 brltty (3.8-4) experimental; urgency=low * Let cl-brlapi depend on cl-cffi. * Fix "Wrong permissions of brlapi.so" (Closes: Bug#439343). -- Mario Lang Fri, 24 Aug 2007 15:32:57 +0200 brltty (3.8-3) experimental; urgency=low * Add python-dev to Build-Depends (Closes: Bug#434858). * Stop config.mk.in from stripping binaries by default on install (Closes: Bug#436606). * Package Java bindings as libbrlapi-jni and libbrlapi-java: - Add gcj to Build-Depends. * Temporarily disable speech dispatcher support. -- Mario Lang Thu, 09 Aug 2007 15:00:53 +0200 brltty (3.8-2) experimental; urgency=low * Add python-pyrex and dh-lisp to Build-Depends. * Merge r3167 and r3168 to kill two lintian warnings. -- Mario Lang Wed, 01 Aug 2007 11:42:06 +0200 brltty (3.8-1) experimental; urgency=low * New upstream release: (Closes: Bug#414068, Bug#428920). - New SONAME for brlapi, use the opportunity to make the package name match the SONAME: libbrlapi1 -> libbrlapi0.5. - New binding packages cl-brlapi and python-brlapi (tcl, caml and java are not yet done). * Include the TTY driver (for testing purposes) in the udeb build. (Closes: Bug#357887). * Cleanup: Remove lintian overrides. * Add LSB init info section to init script. * Pull changes to support Handy Tech Easy Braille from r3089. * First upload to experimental to make it easy to time the transition of depending packages. -- Mario Lang Sun, 22 Jul 2007 15:54:50 +0200 brltty (3.7.2-7.2) unstable; urgency=high * Non-maintainer upload. * High-urgency upload for RC bug fix. * Fix FTBFS with linux-libc-dev (closes: #414068). * libbluetooth2-dev build-dep doesn't apply to non-linux architectures. -- Julien Cristau Wed, 18 Jul 2007 16:50:34 +0200 brltty (3.7.2-7.1ubuntu1) gutsy; urgency=low * Resynchronise with Debian. Remaining changes: - Remove compiler.h include in Programs/usb_linux.c. - Conflicts: libbrlapi, libbrlapi-dev. - Add brltty-setup, installed in both the udeb and the normal system. - Add initramfs integration to run brltty-setup if necessary before usplash starts. - Add ubiquity integration to propagate any brltty configuration to the target system. - Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. - Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; add a NEWS entry for upgraders. * Install udev rules with the same name (85-brltty.rules) in the udeb as in the deb. -- Colin Watson Fri, 18 May 2007 15:27:52 +0100 brltty (3.7.2-7.1) unstable; urgency=high * Non-maintainer upload. * Move xbrlapi to package brltty-x11 and libbrlttybba.so to package brltty (closes: #411426), because libbrlapi1 should only contain the shared library. Move xbrlapi from /bin to /usr/bin in the process. Thanks, Samuel Thibault! * Urgency high to hopefully get this into etch. -- Julien Cristau Sun, 01 Apr 2007 17:03:27 +0200 brltty (3.7.2-7ubuntu3) feisty; urgency=low * Rename brltty=ask to braille=ask (LP: #91894). * Set Ubuntu maintainer field. -- Colin Watson Tue, 27 Mar 2007 12:45:10 +0100 brltty (3.7.2-7ubuntu2) feisty; urgency=low * add missing Replaces in libbrlapi1 (LP#86694) -- Michael Vogt Mon, 26 Feb 2007 15:15:37 +0100 brltty (3.7.2-7ubuntu1) feisty; urgency=low * Resynchronise with Debian. Remaining changes: - remove compiler.h include in Programs/usb_linux.c - conflicts to libbrlapi, libbrlapi-dev * Add brltty-setup based on example code in https://blueprints.launchpad.net/ubuntu/+spec/braille-support, installed in both the udeb and the normal system. * Add initramfs integration to run brltty-setup if necessary before usplash starts. * Add ubiquity integration to propagate any brltty configuration to the target system. * Add udev rules and /lib/brltty/brltty.sh to the normal (non-udeb) package as well. * Enable brltty if /etc/default/brltty has RUN_BRLTTY=yes, which is set by the installer if brltty is configured; added a NEWS entry for upgraders. -- Colin Watson Wed, 7 Feb 2007 17:16:31 +0000 brltty (3.7.2-7) unstable; urgency=medium * The "hopefully final for Etch" release. * Fix out-dated reference to text-table fr in default config (Closes: Bug#406610). * Use 'usb:' and 'auto' as defaults for braille-device and braille-driver in finish-install. This results in a correct brltty.conf file if the user uses the shortcut "brltty=,,de" to activate brltty in the installer with a different translation table then the default (german in this example). Thanks to Simon for triggereing this and to Samuel for providing the patch (Closes: Bug#406257). * Urgency medium because this should ideally make it for etch. -- Mario Lang Sun, 21 Jan 2007 18:48:29 +0100 brltty (3.7.2-6ubuntu1) feisty; urgency=low * Merge from debian unstable, remaining changes: - remove compiler.h include in Programs/usb_linux.c - debian/brltty.init: not enable by default - conflicts to libbrlapi, libbrlapi-dev -- Michael Vogt Mon, 18 Dec 2006 13:39:18 +0100 brltty (3.7.2-6) unstable; urgency=medium * Backport Handy Tech Modular Evolution 64/88 support from upstream repository. This change is harmless, adds support for new hardware that I will need in stable and only affects *one* driver module that I have the hardware for to test if it still works. This would be very nice to have in etch. -- Mario Lang Thu, 14 Dec 2006 18:13:27 +0100 brltty (3.7.2-5ubuntu1) feisty; urgency=low * Merge from debian unstable. Remaining changes: - remove compiler.h include in Programs/usb_linux.c - debian/brltty.init: not enable by default - conflicts to libbrlapi, libbrlapi-dev -- Michael Vogt Tue, 12 Dec 2006 19:16:13 +0100 brltty (3.7.2-5) unstable; urgency=low * Fix startup error during early startup in d-i (Closes: Bug#371458). * Rename finish-install.d script to 05brltty (from 50brltty) (Closes Bug#400538). * Enable the preference menu in the udeb build (Closes: Bug#374556). -- Mario Lang Mon, 27 Nov 2006 14:07:01 +0100 brltty (3.7.2-4ubuntu1) feisty; urgency=low * Merge from debian unstable. -- Michael Vogt Wed, 22 Nov 2006 11:13:04 +0100 brltty (3.7.2-4) unstable; urgency=low * Acknowledge NMU for libbluetooth2-dev Build-Depends, thanks! (Closes: Bug#376863). * Fix FTBFS "'MAX_NR_CONSOLES' undeclared" (Closes: Bug#392135). * Move 50brltty from prebaseconfig.d to finish-install.d (Closes: Bug#373118). * Move libbrlttybba.so to package libbrlapi1 (Closes: Bug#384254). * Upgrade Standards-Version to 3.7.2. -- Mario Lang Tue, 10 Oct 2006 19:09:25 +0200 brltty (3.7.2-3.1ubuntu3) edgy; urgency=low * Backport from trunk (Mario Lang): - Move 50brltty from prebaseconfig.d to finish-install.d (Closes: Bug#373118). -- Colin Watson Thu, 12 Oct 2006 00:03:10 +0100 brltty (3.7.2-3.1ubuntu2) edgy; urgency=low * Move libbrlapi.so symlink back to its correct package. -- Luke Yelavich Thu, 17 Aug 2006 15:14:21 +1000 brltty (3.7.2-3.1ubuntu1) edgy; urgency=low * Merge from Debian unstable. * Move /lib/libbrlapi.so symbolic link from libbrlapi1-dev to libbrlapi1 to make sure that gnome-orca can work with braille support. * Commented out the include for linux/compiler.h in Programs/usb_linux.c. -- Luke Yelavich Wed, 16 Aug 2006 22:57:14 +1000 brltty (3.7.2-3.1) unstable; urgency=low * Non-maintainer upload. * changing build-depends from libbluetooth1-dev to libbluetooth2-dev | libbluetooth-dev as suggested by Felipe Augusto van de Wiel and Rudy Godoy. (Closes: #376863) Thanks! -- Alexander Schmehl Thu, 27 Jul 2006 13:54:51 +0200 brltty (3.7.2-3ubuntu1) edgy; urgency=low * Resynchronized with Debian, only Ubuntu changes are: - debian/brltty.init: not enabled by default. -- Daniel Holbach Fri, 7 Jul 2006 16:02:42 +0200 brltty (3.7.2-3) unstable; urgency=low * Add libbluetooth1-dev to Build-Depends. * Patch from SVN to fix Papenmeier memory leaks. * Go back to libxaw7-dev (on request from the XSF). * Remove brltty.1 from udeb (Closes: Bug#359326). * Patch frm SVN to eliminate rpath usage (Closes: Bug#360252). * Really purge brlapi.key (Closes: Bug#327238). * Reshuffle misplaced files (Closes: Bug#357860). * Samuel Thibault : * Autostart brltty only if the user set some "brltty=" parameters at the kernel command line. * Add udev rules for autostarting brltty when USB devices are probed. * Disable framebuffer and install brltty when brltty got auto-started. -- Mario Lang Wed, 19 Apr 2006 13:04:54 +0200 brltty (3.7.2-2) unstable; urgency=low * Move xbrlapi to libbrlapi1-dev. -- Mario Lang Wed, 22 Feb 2006 10:48:29 +0100 brltty (3.7.2-1) unstable; urgency=low * New upstream release (Closes: Bug#343122). * Use debhelper's new udeb capabilities instead of hacking around the issue. Updated Build-Depends to >= 4.2. * Drop debconf /etc/brltty.conf management support (sorry to the translators) (Closes: Bug#313182, Bug#314146, Bug#341029). * Add --retry 5 to init script stop/restart targets (Closes: Bug#313262). -- Mario Lang Wed, 22 Feb 2006 09:39:36 +0100 brltty (3.4.1-2) unstable; urgency=low * Include Czech debconf translation (Closes: Bug#237678). * debian/brltty.postinst: erm, it is /etc/brltty.key, not -key. -- Mario Lang Fri, 12 Mar 2004 19:30:59 +0100 brltty (3.4.1-1) unstable; urgency=low * New upstream bugfix release. * Fix the regexp in brltty.postinst so that config files where a tab immediately follows the option name are edited properly. -- Mario Lang Tue, 20 Jan 2004 10:48:26 +0100 brltty (3.4-1) unstable; urgency=low * New upstream version: * "Fixes" my blunder with makePath since what I backported to 3.3.1-7 is now integrated (Closes: Bug#226656). -- Mario Lang Sun, 4 Jan 2004 20:19:23 +0100 brltty (3.3.1-7) unstable; urgency=low * Massive patch to enable inclusion of all driver modules in the executable for brltty-udeb (this saves more space, and fixes the problem that driver modules were referencing symbols defined in the executable): - Programs/{spk,brl}_driver.h: Rename the {Braille,Speech}Driver structs from {brl,spk}_driver to {brl,spk}_driver_XX where XX is the two-letter driver code. This change went already into upstream's subversion repository, and is how 3.4 will do it. However, backporting this change into 3.3.1 means that you can not use this version of BRLTTY with driver modules compiled for a standard 3.3.1 (upstream doesn't support any kind of versioning anyway, and expects that the executable and driver modules are in sync at all times, so this will only beat those who already try to do unsupported things.) - configure.in: Add --enable-all-builtin. (This is not how 3.4 will do it, but upstream doesn't have this in subversion yet, so I had to go ahead and implement it myself (somehow ugly, but still working). - config.mk: Add BUILTIN_DRIVERS and DRIVER_LIST variables for conditional linking of all driver modules into the executable. - Drivers/*/braille.c: Make various private globals static. - Drivers/*/speech.c: Make #include "Programs/misc.h" appear before #include "Programs/brl_driver.h" to make macros available. - Documents/{brltty.{conf,1},Manual.sgml}: Document the fact that specifying drivers by full shared object path is no longer supported. - debian/rules: Use --enable-all-builtin if building the udeb. (Closes: Bug#211092, Bug#219928) -- Mario Lang Sat, 15 Nov 2003 13:04:39 +0100 brltty (3.3.1-6) unstable; urgency=low * Add package groff to Build-Depends (closes: #219364) -- Mario Lang Thu, 6 Nov 2003 12:18:43 +0100 brltty (3.3.1-5) unstable; urgency=low * Add linuxdoc-tools to Build-Depends (closes: #218815) * Upgrade to Standards-Version 3.6.1. -- Mario Lang Sun, 2 Nov 2003 20:38:47 +0100 brltty (3.3.1-4) unstable; urgency=low * Patch from 3.4-branch: Support for HandyTech Braillino. * debian/control: Added Braillino to list of HandyTech devices * debian/po/nl.po: Updated (Closes: Bug#215363). * debian/rules: - Install Drivers/*/README* in /usr/share/doc/brltty/. - Remove the vh driver from brltty-udeb since it is redundant and currently broken. Vario users should use Emulation 3 (PB1) or Emulation 4 (PB2) with the TSI (ts) driver. -- Mario Lang Wed, 29 Oct 2003 18:00:45 +0100 brltty (3.3.1-3) unstable; urgency=low * Programs/scr_linux.c: - Patch from 3.4-branch: Assume a direct-through mapping if ioctl GET_UNIMAP returns a zero-element map. * New Japanese debconf translation (Closes: Bug#210711). -- Mario Lang Thu, 11 Sep 2003 15:09:00 +0200 brltty (3.3.1-2) unstable; urgency=low * debian/brltty.init: - Use --pidfile for start-stop-daemon to prevent starting several instances of BRLTTY. This also removes a indirect dependency on a mounted /proc since start-stop-daemon requires it when used with --exec or --name (Closes: Bug#208323). * Change Architecutre of binary package brltty to any. * Switch to po-debconf (Thanks to Christian Perrier, Closes: Bug#205806). * Add French debconf translation (Closes: Bug#206732). * Add Brazilian Portuguese debconf translation (Closes: Bug#187782). * Update German debconf translation. * Update debian/lintian.override. -- Mario Lang Tue, 9 Sep 2003 18:04:45 +0200 brltty (3.3.1-1) unstable; urgency=low * New upstream release. -- Mario Lang Mon, 1 Sep 2003 17:10:49 +0200 brltty (3.3-1) unstable; urgency=low * New upstream release. * debian/README.Debian: - Remove obsolete notes. * debian/brltty.docs: - Removed Documents/Manual-ger-HTML/ and Documents/Manual-ger.txt since upstream deleted the obsolete German manual. * debian/brltty.post{inst,rm}: - Create (only if not existing) and rm /etc/brlapi-key. * debian/control: - Add packages libbrlapi and libbrlapi-dev. -- Mario Lang Mon, 4 Aug 2003 18:11:16 +0200 brltty (3.2-5) unstable; urgency=low * Fix a case where upgrade failed due to init script start failing (add --oknodo, and remove --quiet) -- Mario Lang Fri, 4 Apr 2003 14:12:56 +0200 brltty (3.2-4) unstable; urgency=low * Fix doc-base.brltty (Closes: Bug#183230) -- Mario Lang Sun, 16 Mar 2003 23:36:13 +0100 brltty (3.2-3) unstable; urgency=low * For udeb configure, set CXXFLAGS=-Os too, save another 608 bytes. * Portability fix in config.c * prebaseconfig: use apt-install, support short-hand device names, and translate them into their non-devfs equivalent names. -- Mario Lang Fri, 21 Feb 2003 12:23:44 +0100 brltty (3.2-2) unstable; urgency=low * Add 50brltty to prebaseconfig.d in the -udeb variant. -- Mario Lang Tue, 4 Feb 2003 17:50:32 +0100 brltty (3.2-1) unstable; urgency=low * New upstream release (Closes: Bug#177400) * Remove undocumented.7 link and replace it with a real manpage from upstream (yay!) * Set standard-version to 3.5.8 * debian/brltty.templates: * texttbl: renamed to text-table and changed text.german->text.de, text.sweden->text.se1 and text.swedish->text.se2 and added text.ru. * speech-driver: New question. * braille-driver: Now put the full driver name in the select, and look the two letter combo up in brltty.postinst. brldriver: Removed. * override: New question. * debian/brltty.config: * Added override question, copied from libpam-ldap. * Added speech-driver. * Changed brldriver to braille-driver * Swap device and speech-driver position. * Provide device and speech-driver defaults based on braille-driver selection. * debian/brltty.postinst: * Moved /etc/brltty.conf mangling here, also partly taken from libpam-ldap. * debian/brltty.init: Use -P and --pidfile. --exec didn't work with restart on upgrade. * debian/brltty-udeb.init: Remove mknod again, upstream handles devfs now. * debian/rules: * Build brltty and -udeb with --disable-tainted-components. This prevents accidental builds with the viavoice speech module included. * Build brltty-udeb with CFLAGS=-Os, --disable-speech-support and --disable-pm-configfile. * Update lintian.override to get rid of select-with-translated-default-field and bogus partial-translated warnings. -- Mario Lang Mon, 3 Feb 2003 17:10:32 +0100 brltty (3.1-4) unstable; urgency=low * Add --with-braille-device=/dev/tts/0 to configure-udeb target, because d-i is using devfsd. * Add mknod /dev/tty0 call to brltty-udeb.init. -- Mario Lang Mon, 9 Dec 2002 13:45:23 +0100 brltty (3.1-3) unstable; urgency=low * Use gcc instead of ld to link. -- Mario Lang Mon, 18 Nov 2002 20:21:20 +0100 brltty (3.1-2) unstable; urgency=low * Update config.guess/sub on debian/rules clean. * Set DH_COMPAT=2 while doing dh_installdeb for the -udeb to prevent filenames like /etc/rcS.d/S02brltty.dpkg-new -- Mario Lang Mon, 18 Nov 2002 16:38:20 +0100 brltty (3.1-1) unstable; urgency=low * New upstream release. * New binary package brltty-udeb. * Lots of changes to debian/ files were necessary because upstream changed to autoconf, and also decided to rename the whole source tree! * Excluded viavoice from configure.in again. * Remove mknod from Programs/Makefile. -- Mario Lang Wed, 13 Nov 2002 22:18:20 +0100 brltty (3.0-1) unstable; urgency=low * New upstream release. -- Mario Lang Tue, 13 Aug 2002 12:30:00 +0100 brltty (2.99.5-5) unstable; urgency=low * Added --oknodo to brltty stop (Closes: Bug#149989) * Added db_stop to end of postinst (Closes: Bug#147776) -- Mario Lang Mon, 8 Jul 2002 14:30:28 +0100 brltty (2.99.5-4) unstable; urgency=low * Created lintian override file to prevent warnings which aren't relevant -- Mario Lang Mon, 24 Jun 2002 17:31:28 +0100 brltty (2.99.5-3) unstable; urgency=low * Fixed copyright file to point to gpl * Fixed upstream changelog name to changelog.gz instead of ChangeLog.gz * dh_compat set to 3 * German debconf templates (Closes: Bug#118044) * Added many archs to build on too * Changed runlevel to S -- Mario Lang Wed, 22 May 2002 19:21:29 +0100 brltty (2.99.5-2) unstable; urgency=medium * Fix init script to correctly behave (hopefully this time) * Added Spanish templates (Closes: Bug#136361) * Added Dutch templates (Closes: Bug#134622) * Urgency medium to go to woody -- Mario Lang Thu, 11 Apr 2002 18:01:44 +0100 brltty (2.99.5-1) unstable; urgency=low * New upstream version. * Fixed /etc/init.d/brltty stop bug (pidfile) * Added new drivers in debconf templates. (I won't install i18n templates until 3.0 is out) -- Mario Lang Sat, 16 Feb 2002 18:40:58 +0100 brltty (2.98-2) unstable; urgency=low * Fixed control file to section extra as override file requested * Added missing braille drivers to debconf template -- Mario Lang Mon, 29 Oct 2001 15:05:57 +0100 brltty (2.98-1) unstable; urgency=low * Initial Release. -- Mario Lang Thu, 4 Jan 2001 16:22:12 +0100 Fetched 112 kB in 0s (557 kB/s)